• NEW USERS: If you haven't received your Confirmation Email: There has been an ongoing issue with the forum's send mail function and many new users haven't received the email to confirm their registration. I've done my best to manually process these, so there's a good chance if you've signed up in the past 30 days that you've already been validated and can proceed with posting on the forum (don't forget to introduce yourself!). If you still can't get in, please use the Contact Us link on the bottom of any page to send me a message and I'll process you manually. Thanks for your patience! ~Jerk

Recent content by KTM AL

  1. KTM AL

    Lean running

    I believe that the the Fuel X adds a percentage of additional fuel (the pro is adjustable) to the closed loop when the bike is not under load and your just riding at a constant throttle position and the Booster Plug works on open loop which adds a percentage of additional fuel when you open the...
  2. KTM AL

    Hitchcocks Performance Valves

    Thank you for your replies. I think I might get the valves seated professionally at MX Zone Motocross Engine tuning, Serdi valve seat cutting, Cylinder Head Repair Specialist, Valve Seat Replacment , valve guide replacement , I normally do all my own work , but as these chaps can do it for not...
  3. KTM AL

    Hitchcocks Performance Valves

    Has anyone fitted Hitchcocks performance valves and cut the seats to 30 and 45 degrees? If so what cutter did you buy and use?
  4. KTM AL

    STAGE 2 PERFORMANCE CAMSHAFT

    Hi Thanks for your informative reply, I think most of us are new to this dishing, I have never come across it on modern motor.
  5. KTM AL

    STAGE 2 PERFORMANCE CAMSHAFT

    Just seen this subject has been covered a few days ago. Sorry not been on here for a while, nor my Himmi :(
  6. KTM AL

    STAGE 2 PERFORMANCE CAMSHAFT

    Yes may be, thought there are quite a few I believe. My bike has only done 3000 miles.
  7. KTM AL

    STAGE 2 PERFORMANCE CAMSHAFT

    The rattling head apparently is a dished exhaust valve where the tappet hits , so when you do the valve clearance on the flat of the valve, the gap is wrong as the valve has a dish in it which you cant measure. This chaps YouTube vid explains it,
  8. KTM AL

    STAGE 2 PERFORMANCE CAMSHAFT

    Hi Chaps I know this is an old thread but.. I have just ordered a stage 2 cam and performance valves . I need the valves due to the Himmi rattle (dished top of the exhaust valve), so as it will be apart, I thought I may as well change the cam too. I did look for a Tec cam but they are out of...
  9. KTM AL

    Led spot lights

    Me and my mate have these on our bikes , had them over a year and they are still going strong. Mounted on the tank frame. 2Pcs LED Motorcycle Fog Spot Lights Motorbike Headlight Driving Front Lamp 9-36V | eBay
  10. KTM AL

    Rear Suspension Jack Up Link Roller Bearings

    I have not got any further with this, as I have had other projects on the go and not been out on the Himmi. But thanks for reminding me.
  11. KTM AL

    Gidiall chain oiler on Himmy

    Mine is over the chain, but would be better on the side of the sprocket. As it will be put on pottering around the lanes or on the way home it wont be going at any great speed.
  12. KTM AL

    Gidiall chain oiler on Himmy

    As I use it in my chain saws, there is always some in the shed
  13. KTM AL

    Gidiall chain oiler on Himmy

    Looks like the last can of oil I bought isn't Bio. Does the job though.:rolleyes: 5 Litres GATOR OILS CHAINSAW OIL chain bar oil for Stihl & Husqvarna etc. 100cst | eBay
  14. KTM AL

    Muddy Puddles.....or more

    Been there done that :)
  15. KTM AL

    Givi Bars Earned Their Money Today

    I also have the Givi bars and they too have saved the engine a number of times .
Top Bottom