Search results

Good clues ...thanks guys I'll check it out ...👍

Hi,just wondering if this OBD scanner will be ok for my 2022 Classic 350...Will I have to buy an adaptor cable to fit the OBD connector on the bike.....?

Yeah always a problem knowing how reliable and clean ect the mechanics are ....often apprentices get the simple servicing jobs.Once the bikes are out of warranty best if we do it ourselves as I see it.

Gotcha

Good clue ....Thanks

Yeah mine seems to be clearing up as well ....mechanic said he would replace the gasket with a generic O ring if it proved to be a problem .....be good if Royal Enfield put a bit more meat in the future replacement gaskets ....but then we wouldnt need to replace them as often 😋

Glad you got it sorted mate👍

IKON SUSPENSIONS ...ALBURY..AUSTRALIA... will have the details of my shock absorbers, mine were the first one's they made for the Reborn.. I weigh 95 kg and I have my set on the softest setting so that would be worth a mention when ordering... I live 1000 km away from IKON and I received my...

No... have only been up to 50 miles per hour at this point as I am not completely run-in... but then👍 again the icon shocks really make a difference

Mine was leaking even before the first service..... The Replacement gasket didn't seem to make much difference🤔

I have a slight oil leak from under the oil filter cap.... my mechanic replaced the O-ring with a genuine RE Filter and gasket.... when I had the 500 service he said it was very thin and to keep an eye on it... sure enough started to leak again after a couple of 100 kilometres.... just...

👍

Real happy with the IKON shocks and low rider seat....different bike...👍👍

On pickup my Speedo did not work ,the engine light was on and the ABS light stayed on....had a look inside the headlight and one small grey plug was not clicked in properly...all fixed.......i take it you are not referring to the little service due spanner?

Realize I did not need heel and toe after putting the lever up a notch ..Cheers

Yeah ,i am 173 cm high ...average... the low rider seat really made a difference even though it is not that much lower... not really a big deal having to move the gear lever.... as you probably already know there are a couple of good YouTube videos on this very issue... let me know how you go...

Hi Goodbar,just wondering if you have moved the gear lever up a notch....makes a real difference.........as far as the Low Rider seat goes,it will make it a little harder to get the foot under the lever .......the lever is too low from the factory.

Thats interesting.... if it is as easy as not accidently moving the engine i cannot understand why RE bothered with this tool...never seen one for any other bikes i have owned..maybe it is to help people that have little knowledge of 4stroke engines to find TDC. As stated in my previous post...

Yeah the owners book recommends semi synthetic for the REBORN too,so all good.....Thanks.

Cheers ,thanks mate.