Handlebar bolts.

[Blumtnman]

Picking up my Scram tomorrow, can anyone tell me what size allen bolts are in the handlebar clamps? I'll probably need to adjust them straight from the shop.
Thank you anyone who answers.

 

[Laserman]

It's 6MM, and you should be able to run a 30MM riser without issue should you desire one.

 

[Blumtnman]

It's 6MM, and you should be able to run a 30MM riser without issue should you desire one.

Thank you very much, although I don’t think I’ll be running handlebar risers as yet.

 

[Flicka]

It's 6MM, and you should be able to run a 30MM riser without issue should you desire one.

I don't know if they are different on the Scram (I don't think so) but on the Himalayan they are Hex Socket Head Screw M8 X 40

 

[Mortifine]

There should be a 6mm allen wrench in the tool kit that comes with it.

 

[Taff007]

No way are they M6 thread. They are also made of cheese and have so much threadloc on them you will strip the head if not using a high quality hex driver. Looking to swap mine out ASAP.

 

[Mortifine]

No way are they M6 thread. They are also made of cheese and have so much threadloc on them you will strip the head if not using a high quality hex driver. Looking to swap mine out ASAP.

6mm head, not m6. The rest of what you said is absolutely correct.

 

[Blumtnman]

Thanks to all who replied. I didn't need to adjust the handlebars, just the levers, both set just a little low for me.