Larger Foot Pegs for the Himalayan

[505mcmahan]

Has anyone found both wider and longer - 4”+ - foot pegs that fit the Himalayan? I feel much safer when the width of my boots fits entirely on the pegs. Warp 9 Adventure pegs that fit my KLR are close, but would need to be doctored to sit perpendicularly.

Himalayan-fitting Pivot Pegz supplied by Hitchcock’s, though not so long, may be the best available fit, but any other suggestions would be appreciated.

 

[El Guapo]

I found these one another forum, I may order them to see how they work out. 251786510476

 

[505mcmahan]

I found these one another forum, I may order them to see how they work out. 251786510476

Thank you. I think those are ones (or same/similar dimensions), I put on a KLR. Definitely an improvement over KLR OEM, but they still seemed undersized with moto boots on, and now I’m spoiled by the Warp 9s.

Either here or on ADVRider someone went with the Pivots, then extended them with an outer band of hand-cut stainless steel and stainless spacers/fasteners. I may try that, though guess it’s just a matter of time before one of the oversize peg manufacturers catches up with REH.

What part of the world are you in? New Mexico here.

 

[El Guapo]

Thank you. I think those are ones (or same/similar dimensions), I put on a KLR. Definitely an improvement over KLR OEM, but they still seemed undersized with moto boots on, and now I’m spoiled by the Warp 9s.

Either here or on ADVRider someone went with the Pivots, then extended them with an outer band of hand-cut stainless steel and stainless spacers/fasteners. I may try that, though guess it’s just a matter of time before one of the oversize peg manufacturers catches up with REH.

What part of the world are you in? New Mexico here.

I'm in Texas. I'd love to ride one day in NM, it's all flat where I live and pretty boring for the most part. The foot pegs were something I noticed too on my 1st ride, the are about half the width I'd like for them to be.

 

[Eatmore Mudd]

You can get these weld on widener/extenders in different sizes from Works Connection. It's a good option.

 

[ThinkMud]

You can get these weld on widener/extenders in different sizes from Works Connection. It's a good option.

I know this is old now, but do you have a link or part number for that? That would be perfect, seems like you could make the pegs a lot longer so my heals don't hit the exhaust!

 

[modiorne]

I know this is old now, but do you have a link or part number for that? That would be perfect, seems like you could make the pegs a lot longer so my heals don't hit the exhaust!

I just looked at these too, https://www.worksconnection.com/p35404-footpeg-wideners-pro-1-5-8-through-2 and either the 180 or 190 for the Himmy.

 

[ThinkMud]

I just looked at these too, https://www.worksconnection.com/p35404-footpeg-wideners-pro-1-5-8-through-2 and either the 180 or 190 for the Himmy.

Thanks I found them too, I also emailed them asking them how long they are, I would like my pedals to be longer than the stock ones, by at least an inch or so. I'll post back if they email me back.

 

[ThinkMud]

They said the the length is 3 - 3/8". so that should be enough, plus I can weld them further out if need be.

 

[Metalsnacks]

The new MK4 Pivot Pegz are 100mm long, which is 15mm longer than the MK3. Quite a size difference compared to the stock Himalayan pegs.

 

[ThinkMud]

Those look sweet! I got the weld on ones, just need to find time to weld them on. I've never tried the pivot type pegs, I always felt the one thing i never to want move are my pegs lol, but I know some swear by them.

 

[byteofthecherry]

You can get these weld on widener/extenders in different sizes from Works Connection. It's a good option.

Ali express ....arrived tday...£16.00/pair(deliverd to UK, no duty./taxes demanded)...much broader & a little longer and very 'substantual' cast alloy....95mm long(not inc the pivot lug) & 55mm(at widest point)...stock hima is 85mm long & 45mm wide

 

[grymsr]

Ali express ....arrived tday...£16.00/pair(deliverd to UK, no duty./taxes demanded)...much broader & a little longer and very 'substantual' cast alloy....95mm long(not inc the pivot lug) & 55mm(at widest point)...stock hima is 85mm long & 45mm wide

I know this is an old thread but I’m wondering how the pivot pegz worked out?

 

[Sparke]

Do I remember correctly that a KTM pattern footpeg is correct for a Himalayan. What model KTM?

 

[grymsr]

there is a separate listing for himalayan now. don't know if the KTM is the same

 

[Kiwiscoot]

Suzuki DR650 footpegs fit. I have had the Aliexpress ones now for the last 25000 kms with lots of standing. They are comfortable.

 

[Flicka]

Do I remember correctly that a KTM pattern footpeg is correct for a Himalayan. What model KTM?

KTM 390 Adventure, I've ordered it from Ali express:

9.99US $ 14% OFF|Motorcycle Cnc Foot Pegs Pedals Foot Rests For Ktm Sx Sxf Exc Excf Xcf Xcw Xcfw 65 85 125 150 250 300 350 400 450 530 Adventure - Foot Rests - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

(the new bigger one)

 

[hamx5ter]

KTM 390 Adventure, I've ordered it from Ali express:

9.99US $ 14% OFF|Motorcycle Cnc Foot Pegs Pedals Foot Rests For Ktm Sx Sxf Exc Excf Xcf Xcw Xcfw 65 85 125 150 250 300 350 400 450 530 Adventure - Foot Rests - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

(the new bigger one)

is this a straight bolt on replacement for the stock 2020 Himalayan, you think?

Went out on my first dirt ride yesterday and discovered what happens to the stock pegs (with rubber) when your feet get wet and the going gets rocky

Had a look at pivot pegz just now but they are A$280/- ... ouch. I'm going to remove the rubber topper on the standard pegs for now (for my level of riding, that's adequate) but if i can find bigger pegs than standard for less money that would be awesome... There's the whole 'you get what yer pays for' bit, but then again, it IS 1/10 the price, so if it fits, i'll give it a go... does it fit tho?

 

[grymsr]

I shelled out the $ for pivot pegs and love them. I took a tumble in wet grass and the pegs were fine. Dug a pretty good hole in the turf though.