• NEW USERS: If you haven't received your Confirmation Email: There has been an ongoing issue with the forum's send mail function and many new users haven't received the email to confirm their registration. I've done my best to manually process these, so there's a good chance if you've signed up in the past 30 days that you've already been validated and can proceed with posting on the forum (don't forget to introduce yourself!). If you still can't get in, please use the Contact Us link on the bottom of any page to send me a message and I'll process you manually. Thanks for your patience! ~Jerk

Senior Moment ..... FI Vacuum point

madbiker

Well travelled
Location
United Kingdom
It is on the left side of the fuel injection body (same side as the gear lever|) It is at the top and is very difficult to see, it you can get a couple of fingers in you can find it. Alternatively, if you still have the EVAP system fitted, follow the rubber tube that exits the rear of the bash plate and this is where this hose ends up. If you need a picture let me know and I can try and take one for you.
 
It is on the left side of the fuel injection body (same side as the gear lever|) It is at the top and is very difficult to see, it you can get a couple of fingers in you can find it. Alternatively, if you still have the EVAP system fitted, follow the rubber tube that exits the rear of the bash plate and this is where this hose ends up. If you need a picture let me know and I can try and take one for you.

The evaporation system is removed on my bike. I have blanked off the hose leading to the FI about 300mm from the FI body and just tucked the hose under the side panel .. Not an "Engineering Solution" to be honest ....
 
Top Bottom