• NEW USERS: If you haven't received your Confirmation Email: There has been an ongoing issue with the forum's send mail function and many new users haven't received the email to confirm their registration. I've done my best to manually process these, so there's a good chance if you've signed up in the past 30 days that you've already been validated and can proceed with posting on the forum (don't forget to introduce yourself!). If you still can't get in, please use the Contact Us link on the bottom of any page to send me a message and I'll process you manually. Thanks for your patience! ~Jerk

2021 Himalayan LED flasher relay?

S

SilverCycle

Well travelled
Location
Sussex, England, UK
NJAYALAYAN said:
JohnFegy- you have the solution. I bought this replacement relay for when the issue happens again, but so far my original relay is still kicking after 4000 miles. Tapping the relay to unstick works as a temp fix. My newest issue with the 2021 Himalayan relays is the two relays under the seat, one is for the fuel pump, failed in the middle of a ride. Engine just cut out like bike was out of gas. You can pop the two out and reverse them, and that will get you back home. This is a well-known issue with videos on youtube. Hitchcocks UK sells a pack of improved replacement relays- good to have on hand.
Click to expand...
What does the other one (of those two) do? I am adding a relay to switch aux power, and purely by coincidence, chose the same relay. So now I have three of them...
 
M

Mattified

Total noob
Location
lil’Rhodie
Greetings. New here , with a ‘22 Himalayan. Almost 200 miles on . I am in the process of fitting it out to my liking .
Appreciate the info available, led signals are on the list as I am adding other power consuming stuff. Been enjoying the getting acquainted w/my
”Luna Luna Rover” I’ve named her as it was on the full moon in December that I picked up the bike.
My apologies for the intro here but I am not the most computer suave person.
 
D

dodgydogg

Total noob
Location
UK
slowwalker said:
If anyone is interested, I found a solution using an inexpensive Novita EP29 LED relay from my local auto parts store and a connector and pins from Cycleterminal dot com.

Wire colors on my 2021 USA version flasher connector:

White/yellow connects to the EP29 (+)
White/red connects to the EP29 (L)
Green connects to the EP29 (S)
Black connects to the EP29 (-)

Flash rate for my all LED turn signals went from 2-3 times per second to about 1 per second. Same for the hazard lights...
Click to expand...
Hi, I’ve been looking to solve the hyper flashing on my interceptor 650 (2023) with a relay for a while now and I’m trying to emulate your solution, but the LED indicators seem to stay permanently on solid light when I connect the new EP29 relay. Would you happen to know what each colour wire on your bike is for? As my bike has all different colours other than black. Thanks
 
You must log in or register to reply here.
Top Bottom